Fiber Laser Marking Machine – Widely Laser Marking Application

Laser marking and laser engraving are applied on a wide range of metals including steel, stainless steel, aluminum, brass, copper and more.

Tooling

The tooling industry has adapted laser processing significantly over the years. Some of the outdated processes that have been replaced by lasers are chemical etching, dot pin, electro-etching and stamping. Manufacturers are using lasers for marking, carbide inserts, hand tools, government initiatives are using lasers for tracking valuable tools as well as marking critical information on specialty tools for aerospace. Anywhere an ID, tractability or logo is required, lasers are the ideal solution.

Automotive

Laser processing is widely used throughout the automotive industry. XT LASER has supplied systems for laser marking pistons, back lit buttons, VIN numbers, brake components, and bearings among several other automotive applications.

Semiconductor

Laser processing has significant advancements over existing technologies. XT produces industrial grade systems combined with cutting edge laser technology for the semiconductor, flat panel and solar industries. The tech is used for ID laser marking of IC chips, scribing and circuit traces for flat panel and solar markets.

Medical

Medical companies are rapidly converting to laser processing technology. Medical regulations and guidelines are easily met with laser technologies. Lasers are used for ID and tractability in addition to manufacturing processes like drilling, welding and cutting.

Packaging

Laser Processing has only recently started to take hold of the packaging industry, but the benefits are far reaching. Companies are going GREEN by using laser marking on corrugated boxes as opposed to printing alternatives. In addition, laser cutting systems are being used to produce samples to even low volume production of boxes and other paper based materials used in the packaging industry.

Military/Defense

Laser processing is used in applications from marking tactical weapons and munitions to laser cutting armor plate for military vehicles. The military has mandated a standard that all weapons as well as high value tools be marked with lasers.

Firearm

ATF regulations have led the firearms industry to seek solutions for laser marking for marking and identifications of weapons. In addition lasers are being used to replace hand operations for checkering as well as decorative marking on receivers.

Aerospace

Laser processing is widely used throughout the aerospace industry. Lasers are being used to cut, engrave and mark in a vast range of areas.

Personalization

Laser marking is ideal for personalizing a wide range of substrates. Pictures can even be replicated directly into stone wood and even metal.

 

Contact Alex Wang

Email: xintian104@xtlaser.ru

Mobile: +86 18766152065

I WOULD LIKE TO BUY THE FIBER LASER CUTTING MACHINE – HOW AND WHY?

What is the reason that more and more entrepreneurs decide to buy cutting machines that cut in fiber laser technology? Just one thing is certain – the price is no reason in this case. The cost of this kind of machine is the highest. So it must offer some possibilities that make it technology leader.

This article will be a recognizing of all cutting technologies working terms. It will be also a confirmation that a price is not always the most important argument for investment. On the other side there will be presented some useful information which can be helpful during the choosing the best model of fiber laser cutting machine.

At first, it’s necessary to know your working terms well. What types of materials the machine will cut? Are there be a lots of materials to be cut that you should buy the machine? Maybe the outsourcing would be better solution? The other important point is a budget. Even if you have not enough money, you can use different ways of financing. There are many grant sources which can make your financial situation better.

If you would like to analyse cutting precision, the fiber laser is the best technology. It is even 12 times better than plasma cutting and 4 times better than water cutting. So, the fiber laser cutting will be the best solution for the companies that need get masterpiece of precision, even for the most complicated elements. The one of reason of this level of precision is very narrow cutting gap. The fiber laser technology lets also get perfect shape of small holes.

Another advantage of laser cutting machines is the best cutting speed. However the water cutting is also very precise but it takes much more time. The fiber laser cutting machines achieves even 35 m/min speed. It ensures immeasurably better efficiency.

It’s also important to pay attention to the slag, that is set on the element after the cutting process. It makes necessary to waste more time for cleaning. It generates also more costs and more time for preparing final product in this way. The slag is particularly inherent during the plasma cutting process.

There is one more reason that laser machines are better than plasma machines. Laser cutting is not so loud as loud like plasma cutting. Even cutting under the water can’t stop generating noise.

The thickness is particularly the only limitation for the laser technology. Working with thin materials, fiber is suitable – in this case the fiber laser is the winner. Unfortunately, if you use materials over 20 mm, you should think about another technology or buy the machine over 6 kW (it is not profitable). You can also modify your plans and buy two machines: 4 kW or 2 kW laser machine and the plasma cutting machine. It is cheaper set and it has the same possibilities.

Now, when you know some facts, there will be presented things about the costs. The fiber laser technology is the most expensive technology. Cheaper are waterjets but the cheapest is plasma technology. The situation is changed comparing machine cost of operation. The cutting costs are relatively low in fiber laser technology.

Generally, the fiber laser technology is the most universal. It lets cut a lots of materials – metals, glass, wood, plastic and many other. It is also the master of precision and look of cut out elements. If you use thin materials often, the fiber laser cutting machine is the most optimal choice for you.

When you made a decision and chose fiber, you must think about the model. It doesn’t mean the producers analyse. It means parameters. There are many parameter combinations that determine the best choice of solution.. Now, there will be a compiled together various parameters: lasers power, cutting fast and material thickness.

General idea is that the laser power grows with the material’s thickness. Mostly you can find machines that power is in range 2-6 kW. If the thickness is constant, the speed grows with the power value. But it isn’t good idea to cut very thin materials using 6 kW. It is not effective and generates a lot of costs. You should know the machines price depends on the laser’s power. These differences are so big. It’s better not to choose too high laser power.

Now, there a lot of additional equipment for the laser cutting machines. They should make the parameters better. Depends of your needs it is possible to choose some components and get synergy effect. One of the examples is the PCS (Piercing Control System) that is offered sometimes. It is the innovating system that reduces piercing time thanks the optic colours and temperature analyse. Using analysed parameters, controller LPM (Laser Power Monitor) takes the control of the laser beam and prevents micro explosions during the piercing and limits slag creating. The important advantage of this system is the working table protection and longer life time of nozzles and filters.

If you do correct analysis of market offer you can avoid many mistakes. You should know the newest solutions. Any doubts you should discuss with specialist. This approach to the purchase of the laser machine gives you a real possibility to avoid wasting of money and make your advantages stronger.

Alex Wang
0086 18766152065
xintian104@xtlaser.ru

Advantage of Fiber Laser Cutting Machine Application

Advantage of Fiber Laser Cutting Machine Application Lasers are one of the de facto processing solutions in many industries. Right from common Electronics to Aerospace, use of Laser as a cutting tool has become unavoidable.

It’s important to know those few things that make Lasers an inevitable process requirement.

1. Precision

Accuracy and repeatability are one of the foremost factors that is well-thought-out when it comes to special applications. Flexibility of Fiber Laser system acts as an important factor to reach the complex geometries even with best quality and at high speed. Of course, the CNC and the gantry of the cutting machine has a major role in providing stability during the operation; but Lasers has a niche in executing the cutting operation close to the procession of microns.

Laser systems are widely preferred for fabrication applications as the precision of the operation lies in the cutting mechanism – Laser.

2. Resolution

When it comes to the matter of micromachining, Lasers are preferred to be the apt solution due to its immense accuracy and finish achieved through the micron level machining. Lasers could achieve resolutions up to 1 micron.

Any sort of machining work or material processing which are done to a detail of micron, usually between 1 to 500 micrometres demand Lasers.

3. Non-contact Operation

Laser cutting is a non-contact type cutting operation – hence suited for varied applications involving thin materials. This aspect of Laser cutting operation does not deliver pressure or leave any impressions on / close to the operational area of the material.

Trivia: Fiber Lasers are capable to fabricate sheet metals of thickness ranging in between 500 microns to > 20 mm.

4. Speed

High speed cutting operation is one of the best features of Laser cutting. Cutting applications ranging from metal fabrication to microstructures demands hi-speed operation for maximum productivity. Be it Ferrous or Non-Ferrous metals, Lasers offer best in class speed in the cutting operation.

Productivity is directly related to the speed and quality of the output. Quality of the Laser cutting operation could be well administered with the power of Laser and speed of operation. Hence making it the most chosen technology among other cutting mechanism.

5. Economical

Low cost of operation with very less consumables.

No tools involved.

Precise machining with no or very less post processing required.

Clean process.

Trivia: Fiber Laser cutting systems are close to 60% economical compared to the conventional CO2 Laser cutting systems.

Alex Wang:

0086 18766152065

xintian104@xtlaser.ru

Fiber Laser Cutting Machine in the Kitchenware Industry Application

“XT laser FIBER LASER CUTTING MACHINE” for the kitchenware market successfully developed a series of products with independent intellectual property rights, the solid laser cutting machine, fiber laser cutting machine series, high-precision small-format laser cutting machine, etc., for the majority of kitchenware manufacturers choice and application .

Kitchenware processing industry, a large number of products such as range hoods and gas appliance use sheet metal panel, using traditional processing methods mold consumption, efficiency and low cost; restricted product upgrading, technological improvement and innovation. The background environment in today’s scientific and technological innovation, industrial restructuring, market competition is fiercer than ever before, who can find the first breakthrough in the production process, including equipment updates, kitchenware terms of processing enterprises, there is no doubt it is very important to have a realistic and long-term significance. China and Russia laser production line kitchenware processing enterprises needs of small and medium-power laser cutting machine is the best solution to solve the above problems. Its practical and ingenious mechanical design, the superior performance of the optical system, powerful control system. Under the sheet metal of a single piece of material with good beam quality, high precision, small slotted, saving materials, the cutting surface is smooth and safe operation, such as a series of characteristics can be faster and better way to complete any graphic material to reduce the number of skilled workers to eliminate the pressure of rising labor costs, work efficiency is greatly improved, and monthly can save tens of thousands of dollars for outsourcing fee, and within a year will be able to recover the investment cost of the laser cutting machine. Laser cutting machine can not only solve the kitchenware manufacturer has been plagued by many problems, and convenient sample processing on the panel to reduce the cost of new product development, shorten the development cycle of new products. Meanwhile, the laser machining apparatus when the cut material Narrow very high degree, improve the yield of the hoods and the gas appliance, reducing material loss. For some profiled molding products, laser cutting machine has a unique advantage.

Developed by XT laser 500W fiber optic laser machine 1000W metal laser cutting machine, the choice of today’s most sophisticated Germany IPG lasers or the Russian core laser technology laser cavity and devices in the sheet metal processing industry has been widely used, and has accumulated rich experience in industrial applications and brand awareness, “China and Russia laser has become the field of sheet metal processing the best cost-effective laser cutting equipment and the most authoritative sheet metal processing solutions

Contact Person: Alex Wang

Email: xintian104@xtlaser.ru

Mobile: 0086 18766152065

Steel Sheet Fiber Laser Cutting Machine for Elevator Industry

Today, elevator is becoming a more and more important tool in our daily life. The material of the elevator surface is 2mm or less thickness stainless steel sheet, it can cut precisely by our steel sheet fiber laser cutting machine. So fiber metal laser cutting machine is more and more popular with elevator manufacturers.

For elevator cutting has high requirement for neatness of cutting face, fiber laser cutting machines handle the cutting of metal plates with membrane, mirror materials or stainless steel plates.

Firstly, sheet metal parts in elevator industry are of many varieties and little quantity, some of which are customized. Limited by tonnage and mould, multi-position stamping machine sometimes can’t realize processing, and sometimes the production cycle lasts longer, waiting for mould making.

Secondly, there are many decorative stainless steel sheet metal applied in elevator industry, which requires good surface finish. Compared with traditional stamping machines, which make much mould consumption, laser cutting machines bring better surface finish. Last but not least, with better life, the aesthetics standard in modern society gets higher.

Today, elevators should be not only practical but also beautiful. Manufacturers need flat and smooth fracture surface and machining marks, while stamping machines leave machined trace, affecting the beauty.

If you want to learn more knowledge about fiber laser cutting machine, pls contact Alex Wang

Email: xintian104@xtlaser.ru

Mobile: 0086 18766152065